Have you been hit by the notice of plastic woven bag covering?
1. Align with the middle of the rubber roller as much as possible before rolling the cloth.
2. Before the roll of woven bag is fed into the vehicle, both ends of the silicone rubber roller shall be coated with silicone oil.
3. The synchronous speed is reduced to less than 30 m/min when receiving and unloading cloth.
4. Clamp the roll before receiving the cloth, and don't forget to stick the tape. After receiving the cloth, keep the cloth edge aligned with the polarization correction photoeye and then lift the pinch roll.
5. When connecting new cloth, the width of the cloth varies, so it is necessary to observe the cloth edge and adjust the mold edge.
6. The vehicle speed is slightly slow before receiving cloth; After receiving the cloth and before the double-layer joint enters the corona, turn off the corona machine first.
7. After the double-layer joint enters the compound roll, lift the edge cutter and turn on the hair dryer. After the joint, cut and trim the edges.
8. When the joint is rolled, change the roll in time.